Performance Testing Report

You can add below content during performance test report
Contents
 1.    Document History   
      1.1    History   
2    Summaries   of  Test Result
     2.1    Test Cases   
     2.2    Test environment   
     2.5    Test Results summary   
** Observation of comparison result with previous test result
3    References & Glossary   
        - Link, books,config guide used as reference during testcase execution
4    Hardware and Software Configuration   
    4.1    Hardware Configuration
    4.2    Software Details   
    4.3    Test Tools     
               - Add various test tools using during test case execution
    4.3.4    Report
            - resource utilization graph report
            - Response time graph
    4.4    Product Installation steps
5    General Testing Guidelines and Test Configuration, Tuning Parameter   
    5.1    Load Test Strategy and Guidelines   
    5.1.1    Summary of Result(e.g response time,resource utilization, observation)
    5.2    Configuration Parameters   
    5.2.1    Default Settings   
6    Major Configuration   
7    Test Results In Detail   
    7.1    Result of Testcase1
    7.2    Result of Testcase2

Test Plan for Performance related testcases

 You can prepare test cases for load testing as below ..
      Doc history
     General Testing Guidelines and Test Configuration   
      Load Test Strategy and Guidelines   
            - End-to-End load testing
            - load testing of each component
     Summary of Deliverables   
            - Application response time,tps in various load strategies
            - resouce utilization
            - tuning, comparison  
     Test Case LOE and Summary   
     Test Case Summary   
     Test Case Descriptions   
     Scalability and Sustainability  Tests   
     UI(website) Sustainability (concurrent sessions)   
     feature1 Throughput
     feature2 Throughput   
     Mixed Load Sustainability (feature1+featrure2+...+featureN)        
     Fault Tolerance   

remote jmeter load testing : jmeter setup for aggregate results

We can aggregate multiple jmeter report for same test plan on single jmeter with below steps. For that we need jmeter-server to be started.

1. Configuration for Linux machine: -
Jemter-server1 (to execute test plan)
<Server-host1>:  /var/tmp/Jmetertest/jmeter/bin/jmeter-server
${DIRNAME}/jmeter ${RMI_HOST_DEF} -Dserver_port=${SERVER_PORT:-1099} -s -j jmeter-server.log "$@"

Jmeter-server2 (to execute test plan)
<Server-host2>:  /var/tmp/Jmetertest/jmeter/bin/jmeter-server
${DIRNAME}/jmeter ${RMI_HOST_DEF} -Dserver_port=${SERVER_PORT:-1099} -s -j jmeter-server.log "$@"

Jmeter-client (To aggregate results from both jmeter) – Start load test from client
<Client-host1>:  /var/tmp/Jmetertest/jmeter/bin/jmeter.properties
remote_hosts=x.x.x.x:1099,y.y.y.y:1099

2.  Configuration on windows machine :-
 Master1 :
 1. Go to jmeter/bin folder from command line
 2. d:\> set SERVER_PORT=1099
 3. Run command :- jmeter-server
 4. Following logs from jmeter-server.log
D:\data_bkup\pache-jmeter-2.7\apache-jmeter-2.7_server1\bin>jmeter-server

Created remote object: UnicastServerRef [liveRef: [endpoint:[10.77.69.204:5580](
local),objID:[-301b09ee:14d6fdfb82b:-7fff, -2413427225664758460]]]
Starting the test on host <Master1>:1099 @ Wed May 20 11:20:50 IST 2015 (1432101
050801)

 Master2 :
 1. Go to jmeter/bin folder from command line
 2. d:\> set SERVER_PORT=2099
 3. Run command :- jmeter-server
 4. Following logs from jmeter-server.log

D:\data_bkup\apache-jmeter-2.7\apache-jmeter-2.7_server2\bin>jmeter-server
Created remote object: UnicastServerRef [liveRef: [endpoint:[10.77.69.204:5681](
local),objID:[6b47ad4e:14d6fe12c3b:-7fff, 2198693937862588508]]]
Starting the test on host <Master2>:2099 @ Wed May 20 11:22:39 IST 2015 (1432101
159039)

 Client Machine:
 Go to <Client-host1>:jmeter.properties. Change following property
remote_hosts=<Master1>:1099,<Master2>:2099
 1. Start jmeter
 2. Open TestPlan
 3. Run > Remote Start All
jmeter.log >
2015/05/20 11:23:23 INFO  - jmeter.gui.util.JMeterMenuBar: setRunning(true,<Master1>:1099)
2015/05/20 11:23:23 INFO  - jmeter.engine.ClientJMeterEngine: sent test to <Master2>:2099 basedir='.'
2015/05/20 11:23:23 INFO  - jmeter.engine.ClientJMeterEngine: Sending properties {}
2015/05/20 11:23:23 INFO  - jmeter.engine.ClientJMeterEngine: sent run command to <Master2>:2099



- To start load from all remote  client Go to Run > Remote Start All Client

Jmeter :- Runtime throughput controlller

 Runtime throughput control in Jmeter load test
 We can control throughput in jmter during runtime using beanshell.server with following steps.

1.    Set following parameter in jmeter.properties
beanshell.server.port=9000
beanshell.server.file=D:/PEG/apache-jmeter-2.7/apache-jmeter-2.7/extras/startup.bsh
2.    Add initial throughput value in jmeter.properties
throughput=10
3.    Start jmeter from command line.
4.    While creating testplan, add Constant Throughput Timer  and  add “${__P(throughput)}”  in Target Throughput  textbox and  Create on BeanShell script (throughput.bsh) and add following code
setprop("throughput","100");
5.    Now start the load run.
6.    From new command window, change the throughput during runtime.
C:\Program Files\Java\jdk1.6.0\bin>java -jar "D:\PEG\apache-jmeter-2.7\apache-jmeter-2.7\lib\bshclient.jar" 127.0.0.1 9000 "throughput.bsh"
  
Note: This is working with jmeter 2.7

basic of slamd

installation and configuration

 http://dl.thezonemanager.com/slamd/
 SLAMD Server:-
 1. To install the SLAMD server using this package, simply extract the contents of the appropriate archive into the location on the filesystem in which you wish to use SLAMD.
2. define the JAVA_HOME environment variable,
3. Start server bin/startup.sh
4. you should be able access the SLAMD administrative interface in a browser using the URL http://{address}:8080/slamd

SLMD Client:- slamd_client-1.8.0.tar.gz
1. The process of installing the SLAMD client is as simple as extracting the archive containing the client files into the desired location on the client system
2. Configure slamd_client.conf
   - vi /root/slamd_client/slamd_client.conf
   - Add server host/port in SLAMD_ADDRESS/SLAMD_LISTEN_PORT
 3. If you just wish to start a single client, then the start_client.sh shell script can be used to do this on UNIX systems

Note: In both cases, it will be necessary to comment out or remove two lines near the top
of the file that require the file to be edited before it can be used to start the client/server.

How to start test?
1 Goto to slamd admin url - http://<hostt>:8080/slamd
2. Schedule the job.
3. Mail Job Classes > SMTP Send Rate
3. Add details in next page
  - Description,Name, Thread per client,
  - From address, Receipent Address: [10000-20001]@xyz.com
  - Mesage body - <path of msg file>
  - Max Request Rate(TPS) : -